azymuth forum posts in last 60 days

Reply in Topic: One Ocean mast and foils
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
30 Sep 2026 4:22am
mr love said..
I reckon your stab ventilated in that last crash


Looks like both wings ran out of water 😀







Reply in Topic: One Ocean mast and foils
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
25 Sep 2026 3:26pm
2keen said..
You look like you’re riding lower than I’m used to seeing you. Was that a conscious decision having gone from 103 mast to 90?


I was concentrating on riding lower but that spot gets some groundswell and windswell usually from different directions so still breached a few times 😀
Reply in Topic: One Ocean mast and foils
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
23 Sep 2026 11:14am
thedoor said..
Still ripping!

That one ocean and foils go on any axis fuselage? Or they make a one ocean fuse too?


I’m using the Axis V3 windsurf fuse
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
22 Sep 2026 11:27am
Stoked to be able to buy to new freeride windfoiling gear designed in Australia (by Martin Love) - well priced, beautifully finished, really well packaged to freight and most importantly efficient, smooth and carvey.

After 4 windy sessions my first impressions are seriously good.
One session completely overpowered in 40-50 knots gusts on a 2.8m sail the 980 foil was still controllable - but the board was being blown into the air 😀

The super slim, super stiff UHM 13mm, 90cm mast has noticeably less drag, definitely feel that getting up on foil is easier.
The 800 wing is more turney as you would expect, possibly more suited to flatter days to go fast, but super fun and not difficult to ride.
I haven't been able to push for speed on either foil yet as each of the 4 sessions have been overpowered as the wind blew way more than predicted. More to come...
Frothing 🔥🔥


This winter I've been using the 145L board because the winds are crazy gusty when they come over Mt Wellington from the west and NW, and occasionally I need to be able to uphaul and slog back to the beach.
The downside of riding such a big board in strong winds is that it gets blown around in the air and when waterstarting, I have to take a really wide, awkward stance to keep pressure on the front of the board to keep it down.

www.oneoceansportsaustralia.com/one-foils

Session in the video below
NW 25-30 knots, 4.2m Simmer Blacktip, One Oceans All Terrain 980 and 800 front wings


















azymuth
azymuth
WA
2213 posts
WA, 2213 posts
16 Sep 2026 5:37am
The wing board I converted a year ago is still in perfect condition - original thread below.
Worth searching for one with obviously robust construction.

www.seabreeze.com.au/forums/Windsurfing/Foiling/Converting-a-wing-board?fromPage=3&fromTopic=207977&fromY=1815
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
21 Aug 2026 8:19am
Grantmac said..
I don't think we need a mechanical system since we can shift CofG very quickly, because the sailor is by far the heaviest part of the system.


I agree - the easiest foiling axis to control is pitch 😀

Reply in Topic: Good Times (video)
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
9 Aug 2026 4:24pm
2keen said..
Great memories
There is no question, the best sessions are those shared with like minded



So true 👍😎
Reply in Topic: Good Times (video)
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
9 Aug 2026 4:08pm
KDog said..
JJ does Vimeo archive all of your old videos or do they delete the older ones would be great to go back and watch some of those.



They should all be at Vimeo JJwindfoil - some of them have the soundtrack deleted for copyright violation







azymuth
azymuth
WA
2213 posts
WA, 2213 posts
7 Aug 2026 1:08pm
azymuth
azymuth
WA
2213 posts
WA, 2213 posts
5 Aug 2026 12:55pm
Fuse arrived - V3 looks premium - SS Helicoils for the two M6 screws in the head