drnebe forum posts in last 60 days

When you say “seal foams” are you saying a thin layer in the cavity before the first layer of fiberglass? If so do I wait for that first layer to cure before the glass? Also do I need to chase these cracks in the eps or could I start filling now?

Hello, I received some great repair advice here 3-4 years ago and that board is still going strong. I have another old board that finally cracked. It is my go-to board and I would like to prolong its life. I have it sanded back about 2 inches around the crack. It is slightly soft where my fingers are by the crack. I am wondering whether I should just glass over the area a bit heavily or drill or sand through the glass and put some epoxy/ q-cell mix underneath. Doesnt have to be the perfect repair but something reasonable durable and within my limited skill set. Have some fiberglass, epoxy, and qcell filler.






thanks