lemat forum posts in last 60 days

Mark _australia its fun ….. 🙄

Mark _australia said..
Def glass over the fluff

make sure it’s perfectly shaped though, else when u re sand it you’ll find the high points, break thru your glass and then you’re back to the fluffing up.
go about 3x 4oz to be sure.


its fun ….. 🙄

Oh yes! Working with kevlar is nicer resin job 😡 ... everytime a good nightmare for me! What Mark say, a good layer of glass or something sandable over. And use enough resin to laminate, too dry is really bad, kevlar as most "plastic" fibers don't married very well with resin. I find that dry it in oven first is better. If you end with some fluffy cut fibers here and there, soak with cyano glue, let cure and scrap with cutter blad perpendicular, find it work better than sandpaper.

3rd hybrid board build, my homemade vision of bic T293OD for use as lightweigt guy in gusty ligtwind lake.
"Simple cheaper" half sandwich build, i use for foil and windsurf board.
293x71 around 190l. Carbon daggerboard and setting plate i build for last hybrid board. 3 position bic mast track. Chinook power insert. 20kg/m3 EPS with XPS central part in wich i make daggerboard place. Hotwire cut then PU glue









Bottom shape is a simple V nose to tail.




Bottom lam: 4oz glass, 1 oz veil micro sandwich, 5oz carbon UD.