QLD
790 posts
Thanks Guys, I appreciate the help,
OK, progress but still not right. I did the firmware update, it said 'Success' and it will restart. It didn't actually off and was flashing 1 red every 10 seconds continuously. I let it run out of battery and recharged it, but it was on again once it got charge...without turning it on. Have redone the firmware and now have the same 1 red flash every 10 seconds. ?
Any more thoughts. Thanks
QLD
790 posts
Hi Daffy,
The 3-4 second push is doing the same as a single click, it just gives the battery level.
The 6 second push is giving me a solid red light, but there's no wifi signal to the computer so Im wondering how you update firmware without the solid green light. ?
Any more ideas much appreciated.
QLD
790 posts
If I turn it off the red light goes solid for a few seconds as normal...but then the 3 flashes starts showing battery charge and it will keep showing this intermittently all day and night until flat. If I hold the button in for 6 seconds the red light went on permanently until I tapped the button again and its back to flashing the charge level.
I can put it into wifi mode but again if I turn it off from there it still seems to be on.
Any ideas on fixing it ?
