Product of the Week: DinghyRack

8:19 PM Fri 2 Apr 2010 GMT

'Dinghy rack in place' .

Lifting your dinghy on and off the deck can eventually result in damage to the surface. Sometimes in a hard blow, no matter how good your lashing, a dinghy secured to an uneven slippery surface can move or become loose, requiring an unwelcome extra trip onto the foredeck to re-secure it. The inexpensive DinghyRack has the potential to solve both of these problems.

Even if you use davits for simple journeys, the DinghyRack, which consists of several durable soft foam brackets, may be useful for more adventurous journeys when you want to lash the the inflatable on deck to keep it secure.

Dinghy rack Figure 1 - .. .

The system is flexible enough to cater for any size of dinghy, and the cost is reasonable, at around US$50.00, plus shipping if any, and can be shipped to anywhere in the world. The light weight of the brackets makes this also a relatively inexpensive option.

The DinghyRack uses the lightweight, durable soft foam brackets to support an inflatable upside down, several inches above the surface, to prevent damage that could be caused by a hard transom or oarlocks. The system installs easily and doesn't require any holes to be drilled in the bow.

Just place the brackets on either side of the inflatable bow and on the side pontoons just inside the transom plate and then secure the inflatable with rope or a bungee as you normally would.

The system is available in sets of three or four brackets,

Figure 2 Dinghy rack using three brackets - .. .

dependent on the size and shape of your inflatable.

Installing a DinghyRack:
Installing the DinghyRack is easy and does not require any holes to be drilled into your bow, and is designed to be installed upside down on the bow of your vessel.

Figure 1 shows the proper position of one DinghyRack bracket installed on the pontoon.

DinghyRack brackets should be placed as shown in Figure 2 or Figure 3, dependent on the size and shape of your dinghy.

Your DinghyRacks are now installed and your inflatable is ready for securing to the bow with rope or bungee cord as you normally would.

As they are made of durable, marine grade foam your DinghyRacks will provide years of service with normal care.

For more information about the DinghyRack visit

Figure 3 Dinghy rack using four brackets - .. .

www.dinghyrack.com .

To purchase if you are in the USA click HERE .

To purchase from anywhere in the world outside of the USA, click the following link: www.defender.com/product.jsp?path=-1 |294|299768&id=1390659 . If you have trouble finding this link, do a search on the Defender website for DinghyRack.

Click on the extra image below to see a close-up of the DinghyRack in use.

by Andy Gleick/Sail-World Cruising

Click on thumbnails to enlarge and find more photos:

Newsfeed supplied by

#News #Cruising

Cruising

The Bar Crossing: Wait for Slack Water

Cross on slack or the first of the flood.

Cruising

Night Watch: Stay Useful After Dark

Watch stints, handovers and sleep that holds up

Nearby
Frankston (Ballam Park), VIC	3 kn SE	11°
Frankston, VIC	4 kn ESE
Moorabbin Airport, VIC	4 kn S	11°
Cerberus, VIC	Calm	9°
Ferny Creek, VIC	Calm	9°
Fawkner Beacon, VIC	5 kn ESE
Rhyll, VIC	3 kn SSE	12°
Windiest in Australia
Hartz Mountain (Keoghs Pimple), TAS	31 kn W	5°
Most Windless in Australia
Witchcliffe, WA	Calm	11°
Hottest in Australia
Fitzroy Crossing, WA	5 kn SW	32°
Coldest in Australia
Perisher Valley, NSW	Calm	1°
Wettest in Australia
Pukatja, SA	41.0 mm

Product of the Week: DinghyRack

The Bar Crossing: Wait for Slack Water

Night Watch: Stay Useful After Dark

Live Weather

Nearby

Windiest in Australia

Most Windless in Australia

Hottest in Australia

Coldest in Australia

Wettest in Australia

(Other) Articles

Buy & Sell

2021 F-One 12M Bandit

2024 Neil Pryde Fly 2

2020 Blue Planet Surf Easy Foiler

2025 Neo Dlab 9M

2025 North Hm105 Mast

2019 Fanatic Grip

2026 Kt Surfing Blade

Know before you go

Download the Seabreeze app for iOS or Android.

Weather

Activities

About

Other

Support