Ok, so I had a look under my 4wds underbody the other day and it's got loads of rust spots starting. I've been googling loads about rust prevention and it seems my Trufield electronic rust prevention and regular washing isn't good enough for driving on the beach most weekends

I bought some Heavy Duty Lanolin and tested it on small section, it just attracts sand and dirt like a magnet, from reading forums it seems this isn't the best solution.
So far it seems
Chemtech Fertan rust converter is a good start for treating my existing rust.
Then to stop it happening again there are two seemingly durable products coming out top.
1 -
Penetrol (Paint Conditioner and Penetrol Aluminium), seems you paint/spray the conditioner first then the aluminium when that has dried.
or
2 -
POR 15 (marine Clean, Metal Ready & POR-15)
Has anyone had any experience with these products and regular beach driving? How do you apply them without pulling your 4wd to pieces? Can this be done professionally?
Cheers
Dazza