WA
164 posts
Ive just bought a 2006 Addiction board (133 Edge) There is no wind, so Im yet to try it out. But it looks pretty good.
There is a bit of minor damage on the underside in a cuppla areas. The laminate on the edge is lifting slightly from the core. Im thinking of trying to glue it back down. It shouldnt be a big deal, but not sure what the core is made of, and I dont want the glue to react with any of the other materials... (I was thinking a bit of liquid Nails would do the trick)
Has anyone had the same problem - or done this - or know what the boards are made of???
Also another question. The board has got different fins on either side, where the 2006 boards released like this? Or has the previous owner maybe put in some different fins?
WA
9106 posts
Take the board to Damo in SOS in Freo he will advise guide or even repair for you. He makes n shapes Addictions
The boards were made with black plastic fins, which werent the best so the previous owner has changed them
Great board choice though...you wont be disppointed
WA
1140 posts
DON'T use liquid nails !
Theres a good chance it will eat the foam !
WA
164 posts
Just spoke to a guy at SOS - He tells me that the best stuff to use would be Epoxy resin or Aryldite... Cheers for your help. Now I cant wait for some decent wind to try it out...
