Hey,

I have recently upgraded to an Ozone Edge (been great so far!). I wanted to put a longer depower line (6mm amsteel or covered spectra) on for racing so in my haste I pulled the stock depower line out of the plastic tubing but for the life of me cant get the original or new line back through the PVC tubing.

Has anyone attempted to do the same/ any ideas how to thread the 6mm rope back through?? (Ive tried pulling it through with whipping twine but the tubing just seems to be to small now)

Thanks in advance!

doycle said...

Hey,

I have recently upgraded to an Ozone Edge (been great so far!). I wanted to put a longer depower line (6mm amsteel or covered spectra) on for racing so in my haste I pulled the stock depower line out of the plastic tubing but for the life of me cant get the original or new line back through the PVC tubing.

Has anyone attempted to do the same/ any ideas how to thread the 6mm rope back through?? (Ive tried pulling it through with whipping twine but the tubing just seems to be to small now)

Thanks in advance!

Spray the line with silicon not too much and then heat the tube in hot water and pull it through with a bit of fine spectra stunt kite line, all available at Kp :-)

Well the heating the tube and the whipping twine worked ...enough to get it half way but now its stuck again so I think ill grab some silicon spray and try again tomoz.

Thanks for the suggestions!