VIC
77 posts
i have dinged the base of my underground flx 132
any tips on repair methods????
its a small tear in the base
QLD
2800 posts
hey coil, contact adrian roper at underground, he is great with customer service and will give you the best advice for fixing ya stick.
WA
1802 posts
... I used clear 2 part epoxy resign, i had a puncture wound in mine... bought it( the epoxy) form FMS, mixed it up, blob it onto the dinged area so it's just above the flat level of the board base, sand back to near level, go a finer, then finer thern finer sand paper, or you can use car cutting paste to get it crystal clear towards the end
only use epoxy resigns, not any vinyl or esters......
takes 24-48 hours in hot dry areas to dry ( rock) so you can sand it. if it's humid or cool it will take longer
nick
VIC
253 posts
Yep, throw it away and buy something else..........
Its not that theyre not a great board, im just sick of seeing them everywhere.
VIC
172 posts
obviously nobody thought about sticky tape, it's definately under rated! If somethiing can't be fixed with sticky tape or a clothes hanger then throw it away.
