JohnnyMack,
Inversions can take different shapes or forms and as a result lead to various problems.
On the other hand death loops can only be caused by variation in your line lengths, for example if one of your back line is longer than the other or even if one of your front line is shorter than the other. This can also be caused by a bridle getting tangled around the wing tip or around the kite for example.
As a newbie, the best practice to recover from an inversion is to release the safety system and get to your kite, self-rescue and sort it out on the beach. When you get more advanced, you'll figure out ways to recover from it, either by using your safety system (best practice IMO) or not (much more dangerous). If you haven't yet done a self-rescue I suggest making this your top priority skill to master.
The biggest issue with kite inversions is that people very rarely use the safety system, which often causes the kite to fly inverted / out of control.
If the kite starts to spin, after a few loops, you may jam your safety system and render the safety system useless. So once again the key is to release the safety
as soon as this happens. Soon you'll be able to reassemble your safety and relaunch the kite quickly when this happens.
If your lines are simply crossed (typical problem after an inversion), it's not enough to send your kite into a loop and you will be able to fly it back to the shore. Don't try to fix those crossed lines in the water unless you're a pro and willing to risk loosing your kite.
Also, if your safety system is connected to more than 1 line, i.e. dual front line safety system, this may not help in solving your problem and rescuing yourself.
So in summary, if you release the safety system very early (as soon as you invert the kite) and you are using a single front line safety system your chances to recover from it are very high
PS: watch out for bad/ very gusty winds, they are dangerous, especially for newbies...
Christian