newbie misses can't reach the kite bar

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
THEYDONTKNOWSHOT
THEYDONTKNOWSHOT
VIC
216 posts
VIC, 216 posts
24 Jan 2013 5:26pm
hi my misses is new to kiting. iv just bought her a crossbow 2009 and she's quite confident flying the kite but when she happens to let go of the bar being so short she can't seem to get a hold of the kite bar again? without really struggling.... what should i do?
suface2air
suface2air
QLD
701 posts
QLD, 701 posts
24 Jan 2013 4:42pm
have a look at my pictures in my profile . i did this for me but also for my son and it works great for short arm people like me . swivell was from bunnings for $10 or so . worth a try
THEYDONTKNOWSHOT
THEYDONTKNOWSHOT
VIC
216 posts
VIC, 216 posts
24 Jan 2013 6:25pm
Thanks man.

Which photo? The one with the spreader bar swivel?
BurkeyBoy
BurkeyBoy
QLD
549 posts
QLD, 549 posts
24 Jan 2013 6:38pm
If that doesn't work try boardshort harness or seat harness. The hook on a waist harness sits higher up than on a seat harness. My wife had the same problem with the throw being to long, but the boardshort harness has really helped.
THEYDONTKNOWSHOT
THEYDONTKNOWSHOT
VIC
216 posts
VIC, 216 posts
24 Jan 2013 9:36pm
Yeah that's true didn't think bout tryin a seat harness u can pick them up pretty cheap
terminal
terminal
1421 posts
1421 posts
24 Jan 2013 7:34pm
That jaw to jaw swivel is a really good idea.

Only things I would say -
The quick release release force needed will increase if the pin of the swivel is too thick. The Cabrinha part the Q/R clamps onto is 3mm thick and 4mm deep, so I would get a swivel with a 5mm pin and grind a flat on it 3mm thick. That will also help prevent the pin unscrewing.

Might be a good idea to use loctite on the threads of the other pin when you put it on the spreader hook.

Good idea though - I might use it myself.
kyteryder
kyteryder
NSW
692 posts
NSW, 692 posts
28 Jan 2013 11:52am
Try yanking on the centre line through the bar, this will bring it closer to be able to reach.

I have found that the bar throw on my switchblades, where too much, especially during stronger winds in the upper part of the kites wind range. I switched to a different brand, and now dont have that problem.

THEYDONTKNOWSHOT
THEYDONTKNOWSHOT
VIC
216 posts
VIC, 216 posts
28 Jan 2013 11:57am
kyteryder said...
Try yanking on the centre line through the bar, this will bring it closer to be able to reach.

I have found that the bar throw on my switchblades, where too much, especially during stronger winds in the upper part of the kites wind range. I switched to a different brand, and now dont have that problem.




Yeah that's what she's been doin. I think she's better off gettin a seat harness and then down thr track getting a better kite with better reach. I bought her 2nd hand 09 crossbow. Goes Alrite just it's a slightly smaller bar
Gateman
Gateman
QLD
409 posts
QLD, 409 posts
28 Jan 2013 4:48pm
Hey Fronliner
I recently bought a Cabriha spring from the kite shop for $15 and installed it on my 2010 IDS bar, spring came standard from about 2011 onwards I think. Helps keep the bar and de power all within reach and easier to un twist lines etc.
Takes about a minute to install too, simply start in the middle of spring and coil the spring over the centre lines above the bar and de power Bungay retainer. Works great on 2010 bar and might also work on 2009
Cheers
THEYDONTKNOWSHOT
THEYDONTKNOWSHOT
VIC
216 posts
VIC, 216 posts
28 Jan 2013 8:04pm
Gateman said...
Hey Fronliner
I recently bought a Cabriha spring from the kite shop for $15 and installed it on my 2010 IDS bar, spring came standard from about 2011 onwards I think. Helps keep the bar and de power all within reach and easier to un twist lines etc.
Takes about a minute to install too, simply start in the middle of spring and coil the spring over the centre lines above the bar and de power Bungay retainer. Works great on 2010 bar and might also work on 2009
Cheers


yeah true iv seen that on the later cab models... didn't know u could buy the spring. will have to pop into my local and see if theyv got one. thanks heaps man! that should help ey
pattiecannon
pattiecannon
QLD
593 posts
QLD, 593 posts
2 Feb 2013 11:32pm
Pleny good advice here FL.
Best one being the seat harness.
Cab is really onto the game here to, they do a "ladies model". A m8's missus had lotsa probs with this also and insteada the seat he went the new kite option. More dollars but all us blokes in the group have a nice new 6m to borrow on windy days! It has a shorter throw for the girls & i think some pink in the sail or some love hearts or flowers.... Didn't notice a spring thing but anyway it worked good and my m8's missus is stoked. It cost him a packet but. A seat is an easy fix if the kite is already rockin'.
Please Register, or first...
Topics Subscribe Reply