Hi,

I have a 600psi RYOBI Pressure Washer and am planning on cleaning the fiberglas deck on my Yamaha MS-24. I always used Starbrite, a medium to soft brush and a sponge before and waxed it afterwards.

But some areas on the deck have collected quite a bit of dirt, especially in the grooves of the non-skid (textured surface not sand) surface and I would like to try the pressure washer (600psi is on the lower end of a pressure cleaner).

Any thoughts on using a pressure cleaner on a fiberglas deck?

cheers,
Yamaha24ft

I use a smaller karcher on my fibreglass TS without issue. Just be careful around any cracks..esp if you have cored desks.
I have been researching the 600psi ryobi for my keeler on a mooring and ask:
Is yours 18v or 36v?
How long does the battery last?
Does it remove bird sh$t?
Is it a good jigger overall?
(My birthday is coming up so dropping hints)
Stephen

Hi yamaha
I would be interested to know how well the ryobi 600psi pressure washer works?
Have thought about buying one for a while
I have a smaller 300psi makita copy I use on my decks it works ok never damage anything if anything a more powerful pressure washer would be great

Have the Fatmax 18v unit - good to 24bar/350psi - debatable as to effectiveness,but will not do any damage,and part of array of 18v Fatmax tools .
Would work well rinsing off Metal gleam.

hi there i bought one of those 18 volt washers, wasnt any good on bird **** , had to use a scraper as well.
so i went and bought a petrol powered 3500 psi, no problem now, i hook up my deck wash pump to it and use salt water, then flush it out when i get home