Quad fins for JP Surf pro 8.10?

6 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
northy1
northy1
501 posts
501 posts
22 Sep 2019 8:31am
Hi

Can you suggest a good FCS1 quad fin set up for the JP Surf pro 8.10 model please?

im about 87kg if that helps

thanks!

Northy1
colas
colas
5395 posts
5395 posts
22 Sep 2019 1:15pm
If you are looking for a quad setup for its speed, I would recommend a Quobba thruster set in L size (aka the "plus" yellow/green ones).
The quobba will give you more speed than any set of normal fins. You wont go back.

The only exception may be for rear foot grip at low speed on wide tailed small wave boards (which the JP surf is not), where the traction of the high area of quad rears cannot be found in a thruster setup.
colas
colas
5395 posts
5395 posts
22 Sep 2019 5:46pm
colas said..
The only exception may be for rear foot grip at low speed on wide tailed small wave boards (which the JP surf is not), where the traction of the high area of quad rears cannot be found in a thruster setup.


I forgot to add that for grip at low speed, while not stiffening up at speed, nothing beats the C-Drives.
northy1
northy1
501 posts
501 posts
18 Feb 2020 7:02pm
Sorry for the ridiculously slow response colas!

well im not really getting any where - i have a few Quad set ups - but not really sure i have found the magic formula

I found some GL FCS 1 Quads - they seem pretty flexy, but the rear to me looks huge
www.marinsurfshop.com/1593-aileron-fcs-gl-1-quad-set.html

I also have some FCS1 PC7s - the rears are smaller (FCS GX-Q) but they feel a little bit "dead" to me..or at least in smaller waves so far (Waist to chest)

www.zumajay.co.uk/surfing-accessories/surfboard-fins/fcs-fins/fcs-pc-7-quad-fin-set.html

Maybe i will experiment with the GL FCS1 fronts + FCS PC7 rears?

PScomparing boards with a mate - i did see that the side bite boxes of the JP (Surf pro 8'10) were pretty close to the central thruster box..so maybe i should go back to thruster (2+1) but play with putting the central fin further back - currently with the central fin in the middle of the box, then the leading edge is pretty much aligned with the trailing edge of the 2 side bites....so i wonder if moving it back would make it less "pivoty"
colas
colas
5395 posts
5395 posts
19 Feb 2020 5:58pm
Just try the Quobba. You will not want to use anything else afterwards.All this tweaking with "standard" fins will seem quite futile in retrospect.
estingo
estingo
118 posts
118 posts
5 Sep 2020 4:21am
Funny to read thart always the Quobba come back in the discussion of fins!
colas said..

colas said..
The only exception may be for rear foot grip at low speed on wide tailed small wave boards (which the JP surf is not), where the traction of the high area of quad rears cannot be found in a thruster setup.



I forgot to add that for grip at low speed, while not stiffening up at speed, nothing beats the C-Drives.


But good that you mentioned that nothing beats the C-Drives with grip in low speeds.
micksmith
micksmith
VIC
1701 posts
VIC, 1701 posts
5 Sep 2020 9:28am
estingo said..
Funny to read thart always the Quobba come back in the discussion of fins!

colas said..


colas said..
The only exception may be for rear foot grip at low speed on wide tailed small wave boards (which the JP surf is not), where the traction of the high area of quad rears cannot be found in a thruster setup.




I forgot to add that for grip at low speed, while not stiffening up at speed, nothing beats the C-Drives.



But good that you mentioned that nothing beats the C-Drives with grip in low speeds.


Yes but only by a couple of people
lam
lam
VIC
263 posts
lam lam
VIC, 263 posts
5 Sep 2020 11:37am
micksmith said..

estingo said..
Funny to read thart always the Quobba come back in the discussion of fins!


colas said..



colas said..
The only exception may be for rear foot grip at low speed on wide tailed small wave boards (which the JP surf is not), where the traction of the high area of quad rears cannot be found in a thruster setup.





I forgot to add that for grip at low speed, while not stiffening up at speed, nothing beats the C-Drives.




But good that you mentioned that nothing beats the C-Drives with grip in low speeds.



Yes but only by a couple of people


A couple plus one, I am a new quobba fan
estingo
estingo
118 posts
118 posts
6 Sep 2020 2:00am
@micksmith true, but I don't see a lot of other fin reviews on the forum over here.
and....
I'm soon one to become a fan, but I ordered both the c-drives and the quobba fins so we will see, I'm until now a fan of the K4 fins. But I only have them in FCS1 so I will probably gonna buy an fcs-future adapter (wasabisurf . com).
Please Register, or first...
Topics Subscribe Reply