Tail Shape

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
62mac
62mac
WA
24860 posts
WA, 24860 posts
1 Mar 2011 8:38pm
after talking to Greg from the mct factory on the weekend,he mentioned a few times that a pin tail is looser than a square tail which has me thinking,what do you think Whats the best HP rear end

Is a square tail ok for a all rounder and is a square tail good for a cruiser

Come on Simondo let me have it
doggie
doggie
WA
15849 posts
WA, 15849 posts
1 Mar 2011 9:32pm
Round pin
smh
smh
NSW
7269 posts
smh smh
NSW, 7269 posts
2 Mar 2011 5:26am
After having a lot of 9 footers I found a round tail is definately smoother through turns. My 10 footer has a round tail as well. It comes down to what you like best.




thommo 000
thommo 000
1670 posts
1670 posts
2 Mar 2011 6:15am
haha, tried to tell you that ages ago mac, but you turned down the pin mad mac.
asea
asea
QLD
5544 posts
QLD, 5544 posts
2 Mar 2011 8:20am
Mac i will give you a no. to talk to a bloke and it's not the mct factory.
62mac
62mac
WA
24860 posts
WA, 24860 posts
2 Mar 2011 6:52am
thommo 000 said...

haha, tried to tell you that ages ago mac, but you turned down the pin mad mac.


You did mate dam
asea
asea
QLD
5544 posts
QLD, 5544 posts
2 Mar 2011 8:58am
Go get a pintail up ya mac.
62mac
62mac
WA
24860 posts
WA, 24860 posts
2 Mar 2011 7:00am
asea said...

Go get a pintail up ya mac.


I think I will mate
asea
asea
QLD
5544 posts
QLD, 5544 posts
2 Mar 2011 9:01am
check my board out in the photo,Pintail.
doggie
doggie
WA
15849 posts
WA, 15849 posts
2 Mar 2011 1:06pm
asea said...

check my board out in the photo,Pintail.


Asea is onto it!!
arkgee
arkgee
NSW
639 posts
NSW, 639 posts
2 Mar 2011 6:49pm
go the pin Mac....it's the yard stick of all surf design.
Simondo
Simondo
VIC
8025 posts
VIC, 8025 posts
2 Mar 2011 7:10pm
Yep, rounds, rounded pins, are what I like. Smooth lines.

Rounded Square tail and Squash Tail (rounded pin, converted small rounded square) are great High Performance Bums.... But if you prefer to surf smooth, and draw out turns, glide.... then round tails are better I reckon.

For Mal's, you think Square Tails will go better in small surf, more tail area to get going with.... but rounds still work in small stuff....

(I'm in BrisVegas this week, and next week, if anyone if up for a beer! Torquay at the weekend.)
62mac
62mac
WA
24860 posts
WA, 24860 posts
2 Mar 2011 5:23pm
Yeh thanks Simondo,I've ordered version three with a pin tail.We are also taking some thickness out of the rails but still keeping the 3 inch in the middle about 3 inches either side of the stringer and then tapered down towards the rails.

Also getting a 9 inch fin made for the redline.

Any chance we will see you down here during your visit up north

vanders1
vanders1
QLD
3809 posts
QLD, 3809 posts
2 Mar 2011 8:56pm
Simondo said...

(I'm in BrisVegas this week, and next week, if anyone if up for a beer! Torquay at the weekend.)


Yeah I'll be around mate, where are you staying?

billboard
billboard
QLD
2819 posts
QLD, 2819 posts
2 Mar 2011 9:00pm
A pin tail is most definately not looser - it will assist in easier rail to rail transition and is good if you are into big drawn out turns and lots of flowing turns if used in conjunction with a nice vee through the back of the board. If it's loose you want in a mal then a squash tail is the best option IMO.
doggie
doggie
WA
15849 posts
WA, 15849 posts
2 Mar 2011 7:10pm
Go a swallow tail
62mac
62mac
WA
24860 posts
WA, 24860 posts
2 Mar 2011 7:24pm
Well billboard seems a few disagree with your last post mate
or your trying to set me up hahaha

OK, tell me why Bob would design a hp board with a pin tail as standard
Simondo
Simondo
VIC
8025 posts
VIC, 8025 posts
3 Mar 2011 12:26am
No Goldie action this week, or next week. Just had dinner with Dad, he popped up here.

Vanders, I'm staying north end, Turbot St, area, and working at 30 Herschel St. There's a pub on the corner, but the pub on the next corner towards Roma is better!
Please Register, or first...
Topics Subscribe Reply