Help in the process of designing a custom freefoil board

Sunday
Reply
Register to post, see what you've read, and subscribe to topics.
XavierFerrer
XavierFerrer
98 posts
98 posts
15 Nov 2026 3:50pm
I am in the process of ordering a custom freefoil board from Newind. At the end of the day, it gets a bit stressful having to make all the design decisions. I am currently riding a Goya Airbolt Pro, and I'm looking for a more agile and lighter board. My Goya is 199x64 at 105 liters, and I am considering going with 180x65 at 105 liters. I weigh 80 kg. I want this board for riding swell and jumping.
I've moved my front footstraps to a more centered position, reducing the spacing between the front straps from 26 cm to around 8 cm. However, I've noticed it's a bit harder to make more aggressive turns—I'm not sure if it's just because I'm not used to it yet. I have a 93 cm mast foil.
My questions are:
- What are the pros and cons of having such a centered footstrap stance?
- On the other hand, reducing the length helps lower the swing weight, though I think it makes uphauling the sail harder. How short can you go without compromising the ease of uphauling?
- What are the advantages of a flat nose, like on a Starboard, compared to a more rounded nose like on my Goya?

Thanks in advance for your help
thedoor
thedoor
2545 posts
2545 posts
15 Nov 2026 8:57pm
The main benefit of a more centered stance is that you can ride switch more easily and you are in a better position to ride flagged (although this last one is easily overcome if you don't use a back strap). You definitely cannot load up the sail as much with in board straps, hence slower.

Up hauling is more about where the universal is (eg more centered) than the length of the board.

My gut says a more pointed nose helps touch downs, but with that length and width and trying to keep the same volume as your Goya, you will likely need a square nose
snapback
snapback
75 posts
75 posts
15 Nov 2026 11:49pm
ou very interesting! are you going for the cheaper non carbon version? would like to see some pictures and a review when finished ;) deciding between newind and pulse atm
barthbb
barthbb
114 posts
114 posts
16 Nov 2026 12:27am
I m also curious about this proces and the final result!
XavierFerrer
XavierFerrer
98 posts
98 posts
16 Nov 2026 4:02am
snapback said..
ou very interesting! are you going for the cheaper non carbon version? would like to see some pictures and a review when finished ;) deciding between newind and pulse atm




I ordered the cheapest version, which is less delicate and more durable. I saw on their Instagram that they've posted the sale of 4 freefoil boards over the last few months, and in every case, it was the most budget-friendly version. They mentioned a weight of 6.5 kilos to me. They also told me the construction includes carbon, and I can see the finish is mostly sanded carbon. I believe what it doesn't have is a high-density foam sandwich, because I think they use a foam that doesn't absorb water—it's heavier, yet harder, making the sandwich unnecessary. However, all of this is just my assumption. I'm attaching a link from a Newind user, amazing rider: www.instagram.com/leo77fo/



miamiwindsurfe
miamiwindsurfe
227 posts
227 posts
16 Nov 2026 5:44am
I reported a little on my new freefoil custom from Frank, I don't use harness/foot straps, so that part I can't say much and I do use short fuselages.
New board has flatter / thicker nose, aggressive bevels so much better take off and air dynamics. My tail is on the narrow side, and overall smaller dimensions made uphaul and tacking harder, but after 5-6 sessions in various condition, I'm almost there. I'm getting second one done, so I can keep one in Cabarete and another in Miami. Minor changes, same overall dimensions, but wider tail and more concave under feet
sailortrash
sailortrash
53 posts
53 posts
16 Nov 2026 2:58pm
Dude, maybe u already found it but I just went through that process and made a video about my design decisions

meaning Mojo boards have the bord u r looking for wrapped up in red tape already 🤣


Mark _australia
Mark _australia
WA
23863 posts
WA, 23863 posts
16 Nov 2026 4:44pm
^^^ I guess what works, just works huh 😀

Similar thinking here








My only advice to the OP - full sandwich. I can't see a sandwich deck only will work, just carbon over EPS or XPS foam (anywhere on the board) just isn't strong enough for windfoil IMHO, I see it fail in wingboards. Newind makes windsurf so I imagine he is good. But XPS isn't great with heat so depends where u live too.
sailortrash
sailortrash
53 posts
53 posts
16 Nov 2026 7:31pm
Cool board - flying saucer with a kick tail!
miamiwindsurfe
miamiwindsurfe
227 posts
227 posts
17 Nov 2026 5:22am
Mark _australia said..
^^^ I guess what works, just works huh 😀

Similar thinking here








My only advice to the OP - full sandwich. I can't see a sandwich deck only will work, just carbon over EPS or XPS foam (anywhere on the board) just isn't strong enough for windfoil IMHO, I see it fail in wingboards. Newind makes windsurf so I imagine he is good. But XPS isn't great with heat so depends where u live too.

Think he's using 1 lb foam+ carbon+devinecel/ pad in standing ares, windfoil is too broad of a description. Not sure if stronger construction vs. wing foil board is necessary in my case.. I'm 62 kg, don't jump ,use tinny sails 2.8 and 3.8 / plus no footsteps or harness, short mast an fuselage. My loads / style similar to windfoil I think


sailortrash
sailortrash
53 posts
53 posts
17 Nov 2026 3:00pm
My pal just got a custom back from newind. The xps one with waterproof core
all in he appears very content. Came from the fs 115 and is progressing towards dry hair back loops thanks to this new board

allthough, it didn’t really came back according to specs. A bit wider, longer and heavier than initially agreed upon (105 liter board, order was 180/64/6.9 - came back 184/65/7.3 kg)
but considering the price - around 1490€ - if it’s a strong built it’s still a bargain

I think this Ricardo shaper guy is an old school surfer. Like italiano style Ketih Taboul. It’s about the foam and how u decorate it…
coolmove
coolmove
96 posts
96 posts
18 Nov 2026 12:21am
Mark _australia said..
just carbon over or XPS foam (anywhere on the board) just isn't strong enough for windfoil IMHO, I see it fail in wingboards. Newind makes windsurf so I imagine he is good. But XPS isn't great with heat so depends where u live too.


XPS doesn't need sandwich. I have build a windfoilboard and a wingboard XPS core without sandwich. It works perfectly.

Please Register, or first...
Topics Subscribe Reply