2843 posts
Anyway to tweak the stab angle on these? I already have the mast track pretty far forward and boom low and still getting a ton of front foot pressure. This is on a dedicated foil board which doesn't have many strap options - front straps all the way forward at the moment. The foil is a temp while my regular one is in the shop.
QLD
3424 posts
a washer on the middle screw of the stab will fix it. Don't overtighten it !
2843 posts
Thanks! I'll give it a go.
297 posts
Rubber washers also can do the trick. Since there are three screws in the stab, just add one in the front. I've also seen 1 in the middle and 2 in the front. The rubber washers allow for some adjustability.
IE
QLD
3424 posts
one or two in the front has to be rubber because you don't want the front part of the stab sticking out and creating cavitation and whistling sounds
