quote:

---

Originally posted by bluejuice

I'm feeling brave here risking some flaming.
Decrepit I didn't quite understand your description of the rocker, here's my suggestion use a modern 265 to 280 slalom rocker line,
a.k.a. KA202

---

Thanks bluejuice,
Hope nobody, is small minded enough to flame you, if they don't agree, they can say so without flaming!
sharing rocker measurements is always a hassle, we all seem to do it differently, my method is to use a straight edge as a tangent at a specific point and mesuring the gaps along the board
Trouble is I have no idea about slalom rocker, except they're a lot flatter than wave. Hardie has a couple of Slalom boards, but not sure of their size or age, I'll check tomorrow.
I've measured this one again in 2 different ways. Set a straight edge on the 900 mm point, there is 8mm at tail and 220mm at the nose,
The last 1.3 meter is close enough to a continuous curve, then it accelerates to the nose.
Set the straight edge on the 650mm mark and there is a gap of 5.5mm at the tail and the 1300mm mark.
Must brush up on my maths, should be able to work out a radius from that. (OK spent a while blowing some cobwebs out of the maths dept, and come up with a radius of about 37 meters)
Your V is very close to the conclusion Hardie and I had just come to,
I have a feeling your rocker wont be a lot different either.

Cheers

decrepit