How significant is using correct mast IMCS ?

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
steveBayside
steveBayside
VIC
169 posts
VIC, 169 posts
11 Jan 2010 11:10am
I have a 430/21 mast and a 48cm extension and this works good on a 6.6 sail.

I decided to buy a 50cm Extender (like a 3rd piece of mast) extending the mast to a theoretical 528 cm so i could get a big sail on it, around 8-9m, without buying a new mast.
I had concerns over the stiffness of this mast in such a big sail
(say something like a Neil Pryde V8 8.4m, luff 506cm, suggested mast: 490/29)so I asked the guy in the shop when i bought the extension and he said it would be softer than specified but work ok.

When I went into another shop to buy a sail the guy wouldnt even entertain the idea of test-rigging on this mast combination: it'll be too soft.

I presumed that as the wind i would be using this in would be v.light then getting everything perfect would be less critical.

Similar size sails (8.5 ish) such as North S-Type state a mast of 490/29 or 460/25 with extension, so is it too much to push to IMCS of 21 ?
shear tip
shear tip
NSW
1125 posts
NSW, 1125 posts
11 Jan 2010 3:27pm
AFAIK, masts are reinforced around the area where you attach the boom. With too much extension, you'll be attaching the boom in an unreinforced area, and the mast could snap.

Another thing to consider is the softness. You're wanting a light wind sail and a soft mast will probably allow the top of the sail to flex and spill all that valuable air.

In light winds, I think it's even MORE important to get everything perfect (or as close as possible)
Windxtasy
Windxtasy
WA
4019 posts
WA, 4019 posts
11 Jan 2010 12:55pm
If the mast isn't right the sail just won't rig properly.
Sometimes the battens won't rotate properly.
This sometimes happens even if the IMCS is as specified but other mast bend curve characteristics are not compatible.
Best to use the recommended mast if possible or at least the recommended length and IMCS
Rob11
Rob11
240 posts
240 posts
11 Jan 2010 1:46pm
steveBayside said...



so I asked the guy in the shop when i bought the extension and he said it would be softer than specified but work ok.



First thing, I would not go back to that shop, the guy either does not know what he is talking about or just tried to rip you off.

Rigging a sail specified for a 490 using a 430 is more than a challenge. You are likely to break something:

- extension
- mast extender
- mast

It is already not ideal to use a different brand mast of same length and IMCS in your sail as bend curves might not be compatible.
Please Register, or first...
Topics Subscribe Reply