Hi all,
Ive purchased some older gear in my efforts to get into Windsurfing and Im keen to seperate the masts.

Any tips or clues?
is there a special price of equipment required?
I’m located in Middleton, South Australia.
thanks for any advice
D

Thanks mate that was the trick that enabled me to get free masts from folks who already tried 4 booms etc 😂

Insert an extension into the mast and then hit the bottom of the extension it with a rubber mallet along the longitudinal axis of the mast. You need to tightly hold the bottom of the mast while you do that. Keep hitting it until the mast comes free. It will take a while but it will come free.

I used to have a couple of NP masts that without fail would get stuck. Something to do with water getting into the part were the connect and mixing with carbon dust. Someone showed me that trick. I now tape up the seam with electrical tape before every session. Not had a mast stuck since.