Forums > Windsurfing General

Starboard hull colour

Reply
Created by pepe47 5 months ago, 18 May 2018
pepe47
WA, 1142 posts
18 May 2018 8:16AM
Thumbs Up

Anybody know the colour code for 2016 starboard white bottom/hull? Cheers

elmo
WA, 7788 posts
18 May 2018 10:29AM
Thumbs Up

o410e

pepe47
WA, 1142 posts
18 May 2018 10:35AM
Thumbs Up

Cool, thanks mate.

Mark _australia
WA, 18301 posts
18 May 2018 5:52PM
Thumbs Up

Is it matte?

pepe47
WA, 1142 posts
18 May 2018 6:31PM
Thumbs Up

Yeah Mark, but it's sanded along the length so I need to match then rough it with..maybe some 360 400.

Jethrow
NSW, 664 posts
18 May 2018 8:38PM
Thumbs Up

so if you're going to sand it, do you just add the grit of the sand paper to the paint number for the right mix? ;)

pepe47
WA, 1142 posts
18 May 2018 7:07PM
Thumbs Up

Decided to fix the awful tail of the 2016 iso, according to Dk Peterman's instructions. Only difference was, I used balsa instead of foam. Going ok so far.




Mark _australia
WA, 18301 posts
19 May 2018 9:26AM
Thumbs Up

I have not done that model AND I use 2K on all repairs for other people....... but all matte white finish Starboards I've done a little repair on for myself, the matte white is verrryyyyy close to British Paints "Easy Spray Pint&Prime" flat white. Many can't be seen even with just a dodgy squirt and no attempt to blend.

Rattle can from Bunnings

Bloody nice job there

pepe47
WA, 1142 posts
21 May 2018 7:20PM
Thumbs Up

Thanks Mark, sprayed today and can't see the difference in colour at all. Used the 2k flat white.

choco
SA, 3346 posts
22 May 2018 6:43AM
Thumbs Up

You should have just glassed in the bottom plate and not worry about filling the top void would have been less work

pepe47
WA, 1142 posts
22 May 2018 6:35AM
Thumbs Up

I changed my mind about the cut outs halfway through the job. I had originally intended to leave the 1cm cut'out, but after discussing with a friend, the board's tendency to "crab" around the gybe, the decision was made to remove it completely.


pepe47
WA, 1142 posts
23 May 2018 1:05PM
Thumbs Up

Stripes for the 2017 look, couple of clear coats and just about done. Still got to fix some blue around the edges..


Mark _australia
WA, 18301 posts
23 May 2018 1:56PM
Thumbs Up

wow

nice job!!

stroppo
WA, 453 posts
23 May 2018 6:55PM
Thumbs Up

Gees Pepe great job



Subscribe
Reply

Forums > Windsurfing General


"Starboard hull colour" started by pepe47