Adjustable outhaul

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Hooksey
Hooksey
WA
558 posts
WA, 558 posts
13 Nov 2009 2:46pm
Hi

I have previously bought an adjustable outhaul set from Surf Sail in Perth which includes 4 clamps but only 2 cleats.

/images/misc/forum-image-missing.gif


Would anyone know where I can buy additional 2 cleats only?

/images/misc/forum-image-missing.gif



Cheers
H.C.
Bender
Bender
WA
2236 posts
WA, 2236 posts
13 Nov 2009 2:51pm
The two extra clamps (brown ones) are just a different size if you have a skinnier boom.

You only need two cleats one for each boom arm. have look at one set up down the beach or go to a shop. It quite simple once you see ine set up
Hooksey
Hooksey
WA
558 posts
WA, 558 posts
13 Nov 2009 2:56pm
Bender said...

The two extra clamps (brown ones) are just a different size if you have a skinnier boom.

You only need two cleats one for each boom arm. have look at one set up down the beach or go to a shop. It quite simple once you see ine set up


Hi Bender

thanks for this.

I have used to two blue clamps for my 'fat' boom and now I'd like to use to two brown ones for my skinny boom (in this way I'll have adjust outhal for most of my flat water sails).

This is why I'm only looking for the cleats (guess I'm too cheap to buy a new full set)

fullmoon
fullmoon
WA
314 posts
WA, 314 posts
13 Nov 2009 6:52pm
After a jam cleat slip on the boom where the entire jam cleat setup slipped down to the rear of the boom I replaced the packing rubber sleeve with amalgamating rubber tape (Rubberweld). This grips the boom and the clamp with a slightly adhesive surface that you can wind around the boom and depending on the number of wraps the thickness is also adjustable.
Worked perfectly since.
nebbian
nebbian
WA
6277 posts
WA, 6277 posts
13 Nov 2009 8:22pm
Hey Fullmoon,

I had exactly the same problem, Bender suggested exactly the same solution, and I've had exactly the same amount of problems since: zero

It works well
charlieuk
charlieuk
355 posts
355 posts
14 Nov 2009 4:49am
you can buy the cleats and plastic bits alot cheaper direct form clamcleat than when u buy them as a branded pac from say neilpryde or north
sailquik
sailquik
VIC
6171 posts
VIC, 6171 posts
15 Nov 2009 2:49am
charlieuk said...

you can buy the cleats and plastic bits alot cheaper direct form clamcleat than when u buy them as a branded pac from say neilpryde or north


Got a link for us?
Wineman
Wineman
NSW
1412 posts
NSW, 1412 posts
16 Nov 2009 11:51am
From their website......Aust stockists
No price or avail yet...$27 each

Newcastle Rigging & Chandlery
Belmont
Australia Description: Online Store & Chandlery
Phone: (+61) 02 4945 3547
Fax: (+61) 02 4947 7474
Email: [email protected]
Website: www.newcastlerigging.com.au/chandlery.php

Browse by brand under 'Harken' - Fittings / Hull & Deck Hardware - drop down to Clam cleats

Ronstan
Ronstan International Pty Ltd
220 Bay Road
Sandringham
Victoria
3191
Australia Phone: 03 8599 0000
Fax: 03 8599 0099
Email: [email protected]
Website: www.ronstan.com



Annika
Annika
WA
48 posts
WA, 48 posts
16 Nov 2009 9:07am
Hey Nebs or fullmoon. Where can you get Rubberweld from? My adjustable outhaul collapsed yesterday.
nebbian
nebbian
WA
6277 posts
WA, 6277 posts
16 Nov 2009 2:42pm
Annika,

It's in Bunnings near either the painters tape, or plumbing section. It's used to repair leaking pipes etc.

God I hate how Bunnings is 'organised'.
Annika
Annika
WA
48 posts
WA, 48 posts
16 Nov 2009 3:20pm
Thanks.... would have taken me ages to find it in the bunnings maze.
mineral1
mineral1
WA
4564 posts
WA, 4564 posts
16 Nov 2009 4:18pm
Annika said...

Thanks.... would have taken me ages to find it in the bunnings maze.


Its a boy germ shop as well
Te Hau
Te Hau
497 posts
497 posts
17 Nov 2009 7:11pm
Hey guys,
another way to stop the clamp slipping down the boom......., put one end of the outhaul adjuster rope (knotted) under the clamp and lock it to the boom this way (instead of tying rope around boom tube in front of clamp).
Those clamps never slip with the rope jammed in there as well.
Hooksey
Hooksey
WA
558 posts
WA, 558 posts
17 Nov 2009 10:29pm
Wineman said...

From their website......Aust stockists
No price or avail yet...$27 each

Newcastle Rigging & Chandlery
Belmont
Australia Description: Online Store & Chandlery
Phone: (+61) 02 4945 3547
Fax: (+61) 02 4947 7474
Email: [email protected]
Website: www.newcastlerigging.com.au/chandlery.php

Browse by brand under 'Harken' - Fittings / Hull & Deck Hardware - drop down to Clam cleats

Ronstan
Ronstan International Pty Ltd
220 Bay Road
Sandringham
Victoria
3191
Australia Phone: 03 8599 0000
Fax: 03 8599 0099
Email: [email protected]
Website: www.ronstan.com


thanks - spoke to a guy from Newcastle Rigging & Chandlery yesterday. They dont stock the cleats only. Guess I'd have to call the importer (Ronstan) and see if they have sold any cleats only here in AUS!

nebbian
nebbian
WA
6277 posts
WA, 6277 posts
17 Nov 2009 11:44pm
Te Hau said...

Hey guys,
another way to stop the clamp slipping down the boom......., put one end of the outhaul adjuster rope (knotted) under the clamp and lock it to the boom this way (instead of tying rope around boom tube in front of clamp).


Why don't you put the rope through the hole underneath the cleat? I think that's what it's there for.
Te Hau
Te Hau
497 posts
497 posts
19 Nov 2009 4:46pm
Why don't you put the rope through the hole underneath the cleat? I think that's what it's there for.

No holes on my clamps......at least 10 years old though, maybe they have added a hole?
Please Register, or first...
Topics Subscribe Reply