Armstrong ML65 V2

1 month ago
Reply
Register to post, see what you've read, and subscribe to topics.
eppo
eppo
WA
9886 posts
WA, 9886 posts
7 Oct 2026 9:10am
ML V2 65L….3 weeks and 50 plus sessions in.
Normally i’d write a detailed review - with some footage, but I feel most characteristics of this new board has been well and truly covered by now. Eventually I got my hands on one ….

So after 3 weeks straight - every day on the water … so that’s 22 days all up - I’ve been able to para it up/ down and longer DW runs also a number of wings sessions in the waves. This has ranged from lightish 12/13 to 25 knots.
Armstrong have truly knocked the ball out the park on this one. I’ve dropped down from the 75L ML V1 and I’m like 5kg heavier ! and it hasn’t missed a beat in all conditions. Sure i’d rather wing a smaller board but hey it feels so light and nimble it hasn’t bothered me a bit even in some well over head waves. So one board covers both for me. It also is a handy size for Foil drive as well.

Shape is as good as it gets: Super stable when hunting for a gust, releases early as, bounce downs just skim off the surface, super light for a production board … just everything about is unbelievably good. Oh and it really responds to good board pump up technique - builds speed and bounces off the water.

I could go on but as I said there is already great information out there so all I can say is it’s all true and I’m going out on a limb to say it’s even better than what others have said!!

I just get so excited to get on it…
Eppo
maxpwr
maxpwr
QLD
112 posts
QLD, 112 posts
8 Oct 2026 7:22am
Just ordered an 85L, now you've got me frothing and wondering if I should have gone 75L 😅
eppo
eppo
WA
9886 posts
WA, 9886 posts
8 Oct 2026 11:10am
maxpwr said..
Just ordered an 85L, now you've got me frothing and wondering if I should have gone 75L 😅


what you weigh ?
maxpwr
maxpwr
QLD
112 posts
QLD, 112 posts
8 Oct 2026 3:31pm
Around 82kg right now. I've winged the 75L v1 and it's great but I'm trying to parawing and surprisingly it's not super easy!
Mikedubs
Mikedubs
WA
321 posts
WA, 321 posts
8 Oct 2026 2:02pm
Im 82kg, I only PW now, my 75l mlv2 is a one quiver board. I used to have a 7' 100l and a 6'3 85l, but the Armstrong does it all
maxpwr
maxpwr
QLD
112 posts
QLD, 112 posts
9 Oct 2026 9:05am
but you have WA wind!😂
eppo
eppo
WA
9886 posts
WA, 9886 posts
13 Oct 2026 7:37am
maxpwr said..
but you have WA wind!😂


that is true … that is true 😘

maxpwr said..
but you have WA wind!😂




FoilWays
FoilWays
195 posts
195 posts
14 Oct 2026 3:30am
I parawing the 75ML V2 and I'm 84kg and in very light wind. If you have good wind in your area, at 82kg you'll be fine on the 65ML V2. Even better actually. See, I still have a V1 55ML and 65ML. Even though the ML V2 is an improvement, I can feel the 10L loss, and I prefer that. So if I'm winging I still prefer taking out the 65 or the 55 V1 instead of the 75 V2.
eppo
eppo
WA
9886 posts
WA, 9886 posts
14 Oct 2026 8:17am
Yeh for sure - 75L is a big wing board. Must admit I found the 65ML V2 a really nimble wing board especially as using the PMX 795 mast I’m running it at 11 in the tracks - so not much board in front.

Honestly we had the 75Ml V1 and the 65MlV2 side by side for inspection and it might as well a new board line it’s that different. I’ve had it side by side with a 60L dart (which is a great board) and we all said how well they’ve done with the thinness of the new ML, much lighter and not as much volume in the nose - which the Dart over did a bit as it was what everyone was asking for.

Yeh I got up on a 4.5 frigate the other day in 12/13 knots on the 65 … at 81kg. It wasn’t easy but doable. Kinda need to run two para boards really.
maxpwr
maxpwr
QLD
112 posts
QLD, 112 posts
29 Oct 2026 10:50am
OK boys you convinced me, order changed from 85L to 75L (helps that they're in stock!)
eppo
eppo
WA
9886 posts
WA, 9886 posts
29 Oct 2026 9:39am
Just a quick review I did on a great combo with the ML ….:)


Revelation ML 65 MkII + PMX 795 + MA Front Wing for DW!!

I’m sure the likes of Oskar, Guy, Cash etc. hit flow state all the time. But for us mere mortals? I’m not sure it happens all that often. We simply don’t have the skill set to get there consistently.

Every now and then, though, even us plebs get lucky. When experience and skill meet the ideal combination of quality gear, something special can happen. Flow state!

This is a bit of a lengthy narrative, so apologies in advance. 😂

First, the gear.
After riding this combination of Armstrong gear solidly for a month or so, on most days, I’ve got some thoughts to share.

ML 65 MkII
You know how it is with gear from any brand. There are always things you love, things you’d change and things you wish were just a little better or more suited to your needs.
Well, of all the Armstrong gear I’ve ridden over the years, this board is, from my perspective, by far the best product they’ve ever made.
Seriously. For its intended purpose, it’s about as close to flawless as I’ve experienced. I CANNOT fault it. At all!
I’ve been doing this since the very beginning of Armstrong (well, Axis before Armstrong was even a thing), and this is hands down the best board I’ve used.
I’ve also tried similar boards from other brands, and currently, nothing touches it for construction, shape and performance.
If you’re sitting on the fence about getting one, get off the fence! It’s that good.

PMX mast
There’s probably not much more to add to what’s already been said about the PMX. But for the purposes of this story, what it brings to the table is another dimension to the foils you already own.

That added efficiency translates into more glide, more speed and better turnability.
Those of you who moved from the original A+ mast to the Performer mast will understand exactly what I’m getting at.
Well, this is another significant step forward, in much the same way.

In a nutshell, the PMX essentially gives you the stall speed and glide of a foil one size up, while retaining the turnability you’d normally associate with the size below. This also translates into a much lower stall speed than you’d expect on this type of foil. Recovery in low speed holes becomes increasingly easier the more you understand and trust it.
Obviously, that’s a big deal for UHA and HA riders (and I can’t wait for the new HA!). But for this particular story, I want to focus on the MAs, specifically for downwinding on the parawing.

The MA revelation
We all use MAs for their intended purpose: WAVES!

Tow, boogie, prone, SUP, winging… you name it.
Given their profile and aspect ratio, you might reasonably assume (as I did) that they wouldn’t be particularly well suited to downwind runs.
Too slow for DW, surely?

Maybe in slow runners they’d have their place, but in fast oceanic swell, an MA surely couldn’t keep up? And surely those runners need more efficiency to make the most of their energy?
Right?

Well… sort of wrong. 😂
Recently, combining the ML 65 MkII with the 795 PMX mast and the right tail and shim has completely changed my thinking.
The trick is to sit back, read the lines, carve inside the swell bowl, and then work smart between the faster or slower-moving swell lines.

Get that right, and it’s pure gold.
Since then, I’ve experimented with the 590, 690 and 890 MAs, pairing them with the Dart, 130 Surf, 140 Speed, and even the 180 Speed and 170 Surf tails. Changing tails and shims to suit the speed and energy of the runners has been a big part of the process.
And honestly, it’s been a revelation.
Flow state is happening time and time again, across different water conditions.

I still absolutely adore my UHAs. But if the name of the game is to crank turns and link carves, particularly in undulating, somewhat disorganised swell where you need to get creative, do yourself a favour and try an MA.
You’ll need to adjust your approach initially. There’s no free lunch here. But, man, when it all comes together, these things can open up some seriously dreamy runs.

The real-world test
For some context, over the last three days we’ve still been coming out of winter. We’ve had gusty, frontal-system winds mixed with some summer synoptics. It’s still cold, so there hasn’t been much thermal influence to clean things up, and there’s been a massive swell running.

As we all know, that combination can make for some seriously tricky and technical downwind conditions.

Yet, with the right combination of gear and experience, I found myself in an absolute flow state.

Meanwhile, around ten other riders, some of them very competent foilers, were having a pretty ordinary time of it. Too gusty, runners too disorganised, swell too big… the usual list of complaints that to be honest were justified. Add some weed banks into this equation. Beauty of the MA though due to it smaller span and pitch stability - it’s much easier to throw off weed by breaching the tips than say the UHA.
But the combination of the 890 MA, 120 tail, 795 PMX mast and ML 65 MkII just delivered. In spades.

And that’s really the point of this whole ramble.

The bottom line
Combine the right Armstrong gear with the skill set to get the best out of it, and these MAs suddenly reveal another dimension.
They’re not just wave foils. In the right hands and conditions, they can be seriously capable downwind weapons, too. Armstrong foil design has always been focussed on carving / wave riding - and this Ma is the epitome of that.
I’ve since ordered a 990 and am seriously contemplating the 790 as well.

😂😂 Bloody foil junkie. 🤦‍♂️
Anyhow, essay over. Hopefully there’s something useful in there for anyone keen to experiment beyond the usual DW foil choices.
🤙
kookfoil4
kookfoil4
21 posts
21 posts
30 Oct 2026 6:19am
Hi eppo,

I have a mk1 armie 96l dw board, it's my only foil board. I got it because it was long and narrow and relatively cheap.

I have tried a mk1 ML 75, and that went well, probably better than my dw (I'm 70kg).

Can you explain to me why the mk2 is so much better than the mk1 other than lighter weight? I get long and skinny but a lot of the other shape stuff just goes over my head.
Airshane
Airshane
WA
13 posts
WA, 13 posts
30 Oct 2026 9:08am
kookfoil4 said..
Hi eppo,

I have a mk1 armie 96l dw board, it's my only foil board. I got it because it was long and narrow and relatively cheap.

I have tried a mk1 ML 75, and that went well, probably better than my dw (I'm 70kg).

Can you explain to me why the mk2 is so much better than the mk1 other than lighter weight? I get long and skinny but a lot of the other shape stuff just goes over my head.


Yeh I rode the 75 V1 all last summer and lined them up next to each other to inspect with a local
board builder who knows about these things … It’s night and day. I’m not sure why they even called it the MK2 - the shape (top, bottom, outline - volume distribution ) is totally different.

It’s as good or better than all the para based boards that have come out which was led by the likes of the Omen, axis dart etc. We come a long way with the design know how of what is needed for a para board - and it’s all and some in this board. Square rail, gentle roll rails, volume in the right places (but keeps the nose section thin) relatively flat open surface area bottom but with some clever double concave (albeit subtle) bottom front. Much more stable, releases early, build board speed early and touch downs all much better.

Unfortunately like DW boards couple of years back there’s been a massive jump in evolution of the components that work in a board.

As I said night and day. But hey the V1 still works fine - is it worth the money for the new one. I’m afraid it is
socal
socal
9 posts
9 posts
21 Nov 2026 5:14am
maxpwr said..
OK boys you convinced me, order changed from 85L to 75L (helps that they're in stock!)


Did you get your 75L? If so, how do you like it?

I am trying to decide between the 85L and 75L myself. I wing in about 18knts and weigh 75kg. Currently on a 100L midlength.

I can pick up a used 75L at about 20% off the new price. So I am leaning towards the 75L. Thoughts?
northy1
northy1
505 posts
505 posts
21 Nov 2026 6:17am
Airshane said..
It’s as good or better than all the para based boards that have come out which was led by the likes of the Omen, axis dart etc.


Loads of people are raving about this board for sure....but ive also heard a few people who WING only (not Para) say they prefer the performance of the prior version....thoughts??
eppo
eppo
WA
9886 posts
WA, 9886 posts
21 Nov 2026 8:14am
northy1 said..

Airshane said..
It’s as good or better than all the para based boards that have come out which was led by the likes of the Omen, axis dart etc.



Loads of people are raving about this board for sure....but ive also heard a few people who WING only (not Para) say they prefer the performance of the prior version....thoughts??




Can’t see why - that make no sense whatsoever.
maxpwr
maxpwr
QLD
112 posts
QLD, 112 posts
21 Nov 2026 10:39am
socal said..
maxpwr said..
OK boys you convinced me, order changed from 85L to 75L (helps that they're in stock!)


Did you get your 75L? If so, how do you like it?

I am trying to decide between the 85L and 75L myself. I wing in about 18knts and weigh 75kg. Currently on a 100L midlength.

I can pick up a used 75L at about 20% off the new price. So I am leaning towards the 75L. Thoughts?


Yeah I went with the 75L and no regrets on not going larger. Take the bargain and get it!
TredAvon
TredAvon
27 posts
27 posts
21 Nov 2026 8:42am
socal said..

maxpwr said..
OK boys you convinced me, order changed from 85L to 75L (helps that they're in stock!)



Did you get your 75L? If so, how do you like it?

I am trying to decide between the 85L and 75L myself. I wing in about 18knts and weigh 75kg. Currently on a 100L midlength.

I can pick up a used 75L at about 20% off the new price. So I am leaning towards the 75L. Thoughts?


I'm 77kg and got the 75L mkii for parawing and occaisional winging and it's great. The length and width give you stability especially compared to other boards that pack in more volume and sometimes feel corky to me. And it gets moving and on foil super easy. Going from 100L to 75L might feel like a bit of a jump, but I don't think an extra 10L would buy you any additional low end really.
freesailor
freesailor
VIC
124 posts
VIC, 124 posts
21 Nov 2026 12:42pm
Don’t be afraid to go small on the mk II. Replaced my 75ML v1 with the 55ML mk II and believe it or not …but everything is easier from taxiing, to getting up, to getting up on foil … the v2 is more stable than the v1 even at 20L less, guess having the board just below the water surface vs corking on top of it makes a difference? Wider tail and flatter bevels help for sure. Being so light means it pops up on the surface easy as and once there, 2-3 pumps on you’re off. So impressed I sold my 75ML and the 55ML mk II now my one board quiver all conditions… oh yeah and it is bomb proof, new construction is the works!!!

75kg rider, para only, 865PMX and UHA770/120 dart
eppo
eppo
WA
9886 posts
WA, 9886 posts
21 Nov 2026 11:27am
freesailor said..
Don’t be afraid to go small on the mk II. Replaced my 75ML v1 with the 55ML mk II and believe it or not …but everything is easier from taxiing, to getting up, to getting up on foil … the v2 is more stable than the v1 even at 20L less, guess having the board just below the water surface vs corking on top of it makes a difference? Wider tail and flatter bevels help for sure. Being so light means it pops up on the surface easy as and once there, 2-3 pumps on you’re off. So impressed I sold my 75ML and the 55ML mk II now my one board quiver all conditions… oh yeah and it is bomb proof, new construction is the works!!!

75kg rider, para only, 865PMX and UHA770/120 dart



Yeh kind of depends on where you are skill wise, what paras you want to have (how many) - the range of wind you want to sail in. I’m always on the water - there’s wind, there’s waves I’m on it. Need a board with some low end range. Also depends on how hard you want to make it for yourself - so age is also a factor. Especially when like in wa when it’s on you can get 14-18 days on the trot !!

Then again i’ve now got an 85Ml V2 for super light winds … dear god it never ends.

But if Inwas to get the combo again it maye have been the 55/75 combo to be honest.

…. and to reiterate with some risk of beating a dead horse - the construction and finish on this board is something else to behold.

I can talk about any armstrong product and tell you its pros and cons - there is not ONE con on this. Honestly been the greatest foil purchase I’ve ever made. And I’ve bought a lot!!
Please Register, or first...
Topics Subscribe Reply