Enable JavaScript to get the best experience.

bowsa forum posts in last 60 days

Show Edits

bowsa

Reply in Topic: Goretex vent leak Severne

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

18 Jun 2026 4:06pm

sprayblaze said..

Reflex Films said..

sprayblaze said..
Rule No 1.: Never buy a board from a Pro. Especially a wave board... If you want an abused board than you got one.

Another way to look at it / alternate perspective.

Pros have their technique and landings together. So very few flat landings. Most pros come in super soft from back loops (nose it in) or have their forward technique down (parachute floaty landings)

Intermediates / progressing sailors can do some HIDEOUS flat landings as they are learning all the lessons the hard way.

It very much depends on who the sailor is.

Well at least I am not buying from Koster..And for sure he is familiar with jumping I reckon...😂.

Board is in A+ condition apart from leaking Goretex vent which could happen in any board. So I’d buy again too. It’s 5.6kg and is a dream to ride so yeah… you do you! I’m a happy sailor!

Topic: Mana Island - Fiji

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

11 Jun 2026 9:01am

Hey I’m heading to Mana Island in Fiji in August for a week. Apparently you can get a boat to cloudbreak from there but I wondered if anyone has sailed Mana Island itself? Apparently there a left on the top of the island that doesn’t get as much swell as cloudbreak but is cross off same kind of set up with the Fijian SE trades. Keen to take gear will boat out to cloudy but it’d be fun if you could sail just off the island
cheers

Reply in Topic: Diy Board Repair

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

6 Jun 2026 1:44pm

Yeah a bit soft under the pad

Topic: Diy Board Repair

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

6 Jun 2026 11:28am

I've got my flat water freeride summer lake blasting board cracking under the heel. It's a great board but I'm not keen on investing in a proper repair. What's a DIY job I can do to at least keep the water out. I imagine excavating and bogging with something then glass repair over would be the go or. going really dodgey. could you simply cover the whole cracking area with sika flex or some kind of marine silicone?
any advice appreciated for a home diy job
Ta

Reply in Topic: Goretex vent leak Severne

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

1 Jun 2026 6:33am

Captain_Morg said..
It will work fine. no different than the " normal" metal bung screw and "o" ring
which auto shop was it as my mate is looking for that option.

www.supercheapauto.com.au/p/aeroflow-metric-port-plug-m12-x-1.5/SPO3820905.html?srsltid=AfmBOopNubkYOT9nQq6nxPNYnLgiSYIp5FOaaD-nsl4Kdi-owyS9dUIe

Reply in Topic: Pushing technology forward

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

25 May 2026 4:11pm

Mark _australia said..
Cost. Foam makes new models easy to produce .. but slight tweaks for costly mould changes made it hard to have a range of hollow boards.

then labour cost maybe for more complex layup, trimming halves and then bonding halves properly.
I think foam sandwich is the best blend of cost vs durability vs ability to change shape if needed and that's why it's prevailed.
I've seen some great DIY hollow boards but I think the current mass production of them is a response to the trendiness of wing / DW and wanting to have something new that the other companies don't have. I hope it doesn't translate to $5000 windsurf boards soon.

too late... $4950 farkin el

Reply in Topic: Goretex vent leak Severne

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

22 May 2026 7:50am

asturcon said..
Everything can happen, I have 4 Severneboards and I have changed the valve in the two oldest. I had to smash one valve as I could not get it out, and I obesrved that there were no rubber-ring between the hole and the valve. may be the same for you? The valves had no inscriptions. I changed them to the best valves from "GORE" and with the inscriptions:
M12 X 1,5 PMF 100585
Its the best high flow valve from Gore. Do not forget to put a thin layer of silikon before screwing in the valve.

New PolyVent High Airflow Brings Next-Generation Performance to GORE? Protective Vents Screw-In Series | Gore

John

Thanks
i ended up getting an m12x1.5 alloy plug screw with o ring from automotive shop. Use it as a vent screw
seems to work ok so far

Reply in Topic: free stuff thread

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

21 May 2026 6:04pm

bowsa said..
4.7 north sails hero 2014 model (I think) still plenty of life
if anyone's keen I'll send a pic

Or if someone was feeling generous and wanted to trade for a six pack

Reply in Topic: free stuff thread

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

21 May 2026 6:03pm

4.7 north sails hero 2014 model (I think) still plenty of life
if anyone's keen I'll send a pic

Reply in Topic: Goretex vent leak Severne

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

18 May 2026 6:15pm

cheers - yeah will have a look over it but nothing apparent. talked to mark MoZ (thanks mark) and have removed gore vent plug and got an m12x1.5 alloy screw with hex just going to use that like an old skool (and my preferred) vent plug with O-ring.

Oh maybe a stupid question but do you need a special O ring for salt water?? or just any rubber O ring will do?

Topic: Goretex vent leak Severne

bowsa

QLD

640 posts

bowsa

QLD, 640 posts

18 May 2026 3:43pm

New pyro 93 (to me) was one of Philip Köster customs with more rocker (it’s sick!) got it from him at margs in Feb. always had board upside down and noticed a small pool of water under the Goretex vent screw. So it must be holding water and taking it in. Any advice from other Severne owners with same issue? Repair or replace vent? Can you do it easily or a job for board repairer?
thanks

bowsa forum posts in last 60 days

bowsa

bowsa

bowsa

bowsa

bowsa

bowsa

bowsa

bowsa

bowsa

bowsa

bowsa

Weather

Activities

About

Support