MeonAsh forum posts in last 60 days

Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
16 Nov 2026 10:40pm
My experience with top end on the 3.5m was the same - remains controlled, just becomes a lot to hang onto once you get up towards 35 knots, you can just keep pushing until eventually it pulls you off the board.
Reality is I've changed down long before that point.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
15 Nov 2026 7:17pm
This kicked off a bit. My own view with the ocean bound review is that nothing he highlighted is anything dishonest. It was all his true experience and it reinforces what F One themselves say about the Frigate v2, which is it is a wing for more advanced riders. Jeremy im sure will work it out and his video highlights that as a less experienced parawinger (he is obviously an experienced foiler) what issues you might hit. The task for the more experienced riders is just to poi nt out that some of these issues have easy fixes and come with experience rather than being some "product issue".
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
14 Nov 2026 8:46pm
Some of the things he points out are due to not flying the wing properly - the folding wing tips for example. Harness line is too far forward on his bar and he's riding depowered with no rear line tension. This is why many reviewers including myself don't recommend that the Frigate v2 is for beginners, because you need to understand how to fly the wing properly. The Orbit with it's wing tip collapse ..... same problem, same solution. Also happens on the Pocket Rocket V2 - usually when getting towards overpowered.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
13 Nov 2026 9:28am
Those rear green lines need wrapping into the canopy, so kind of fold the bottom/rear of the wing in on itself first and then bundle from there.
I still sometimes end up with some green bits poking out - they don't do any harm, so not end of the world.
MeonAsh
MeonAsh
157 posts
157 posts
13 Nov 2026 9:23am
yeah - tend to do handle passes on 3.5m and smaller. My PRV2 4.3m also can come round like a cannonball - you aren't alone in that one.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
13 Nov 2026 8:01am
eppo said..









MeonAsh said..
I did finally get to putting a review together - been tough finding time as my software business has been crazy busy these last few weeks and demanding a lot of my time - hence the rather pedestrian release of videos lately, quality not quantity (I hope).












Excellent well put together review mate. I can concur with all your pros and indeed cons. Wonder if it’s worth putting some tear aid around that drainage hole - what you think? Agree with the colour issues and the A line bridle width as well. Small details but there nevertheless.

But for the important flying characteristics - a win for sure.

Now I’m sure i’m not the only one - you are comparing directly with the Power Pack. Did you get to fly the PR2 at all before you bought the frigates as your personal para ?










I have powerpacks and pocket rocket v2s - I also did reviews on the Afterburner, Hatch v2, Orbit and I'm currently reviewing the 777 Hybrid, also tried the AFS Stow, the Quest and the Fynix Sroka but never reviewed those. Soon I'll also have the new Vayu Pyro v2, which is in for review.
So I've been through a few but my personal wings have been powerpacks and PRv2 and I've been waiting for the perfect laps machine - good speed and upwind but also really solid stow/redeploy and no tangles.

I only bought the two PRv2 (in 4.3m and 5.7m) and I didn't buy anymore because it was clear from the 4.3m that I was not going to enjoy stow/redeploy on it, it just didn't give me the feels I was after and it's wind range whilst better than a powerpack felt a bit limited. I might possibly get along with Afterburners but again the stow / redeploy - not in powerpack territory, do love the tack on the afterburner though, that is it's super power. It's also too expensive. Thought about the PRV2 UltraX - also too expensive. Not that I think either of them would be better than the Frigate v2 for what I do but they were options.
MeonAsh
MeonAsh
157 posts
157 posts
13 Nov 2026 6:26am
I've also done videos talking about the different jibes and why you would use them - which is mostly about board speed vs wind speed and apparent wind.
Personally if I'm on a smaller sized wing then I'm nearly always going to do a handle pass - because entry speed is as high as you can manage, which gives you maximum time on exit to sort yourself out before dropping off foil.
Large wings I'll avoid handle pass as the chances it doesn't reopen are much higher - might try a tack, down loop or if it's very light a C line gybe.
If there a good bumps I'll often do a stash gybe and just use the bump to carry me while I turn and redeploy.
If it's absolutely hooning wind I'll do a normal gybe, because the wind is just going to keep it in the air, apparent wind no longer matters, it's a simple well balanced gybe and it keeps the wing powered throughout - stability and simplicity over trying to be clever.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
12 Nov 2026 11:42pm
I did finally get to putting a review together - been tough finding time as my software business has been crazy busy these last few weeks and demanding a lot of my time - hence the rather pedestrian release of videos lately, quality not quantity (I hope).


Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
5 Nov 2026 9:12am
82kg rider, 75L board and 3.5 Frigate v2 in 22 knots ...... yeah no problem at all getting up in that wind.
Reply in Topic: Best foil assist sytem
MeonAsh
MeonAsh
157 posts
157 posts
4 Nov 2026 8:01am
ZeroVix said..

MeonAsh said..
Build one yourself - it's about 25% of the cost of buying a branded one. The brands are all using the same off the shelf components you can buy from those same manufacturers.
If you have a 3D printer and can follow basic instructions then building one is by far the best approach - it really isn't that hard or complicated.

Currently in the process of building a FlipSky system - 6374 motor, FESC68 mini ESC, VX5 remote. Parts cost for those items is about 600 dollars and makes up the majority of the expense aside from the batteries.



Let us know when a self made one actually works. To date, and I have been following a lot of so claimed self made, none have been satisfactory. Even Foil Dash is a joke. Post it on YouTube.


It will work just fine - I intend to do some videos on it at some point. I make this stuff for a living in the aerodynamic industry so it's just a walk in the park for me to construct one.
Reply in Topic: Best foil assist sytem
MeonAsh
MeonAsh
157 posts
157 posts
3 Nov 2026 9:31pm
Build one yourself - it's about 25% of the cost of buying a branded one. The brands are all using the same off the shelf components you can buy from those same manufacturers.
If you have a 3D printer and can follow basic instructions then building one is by far the best approach - it really isn't that hard or complicated.

Currently in the process of building a FlipSky system - 6374 motor, FESC68 mini ESC, VX5 remote. Parts cost for those items is about 600 dollars and makes up the majority of the expense aside from the batteries.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
27 Oct 2026 4:38pm
I shall be able to answer this when my buddy returns from holiday as he has purchased a 5.5. I dont personally have one.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
27 Oct 2026 7:19am
maxpwr said..
It kinda feels like there's something going on with the frigate 2, similar to the initial dwings that had a bad batch.
A mate and his dad, who are very proficient parawingers (own dwings, frigates, afterburner) recently got a 4.5m frig v2 and are surprised how bad the bottom end is.They immediately told the dealer to get rid of the 3.5m, they'd never need it. My mate heard you should go up a size, he reckons go up 1-1.5m 🙃

It's like night and day to what I hear here. I genuinely think there must be an issue.





Without riding your friends parawings nobody can answer this question - I don't have any low end issues at all or any need to size up, the 3.5 and 2.5 that I own fit perfectly into my quiver replacing powerpacks of 3.6m, 3.0m and 2.4m ..... except I only need two now as the 3.5 and 2.5 easily cover the wind range of the three power packs. The only thing I would say is that if they are hanging off the A lines expecting to get power then that ain't going to happen, you need to sheet in the back of the bar a little to get it to fall back in the window and generate power.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
26 Oct 2026 7:00am
Rode the 2.5 today with gusts into 40+ knots, base wind sitting around 30kts. Very impressed, depowers really well, eats the gusts, kept composure even in pretty wild squalls. Finally a small single skin that behaves and isn't horribly back stall sensitive. Gust hits and it just jumps forward in the window instead of completely loosing it and flying all over the place.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
22 Oct 2026 8:47pm
The 36 knot top end is as high as i would like to go on the 3.5. In reality I would be on my 2.5 at 30 knots. Rode the 2.5 yesterday and it was fine in the high 20s. So for me 3.5 to 2.5 works fine, no need for the 3.0m in the middle. Low end wise, I'm probably at 20 knots to be comfortable on the 3.5. But I do run a 75L board and weigh 82kg, so have to factor in some disadvantage there.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
21 Oct 2026 6:19pm
Jeroensurf said..
To get everything in perspective: What do weight Meonash that you need an 2.5 Frigate?
The 4.5 Frigate V2 that I demoed had quite an overlap with my 3.5Quest and being 94kg I easily use that up to 30 knots. I have a 3m quest but so far not needed it yet so wonder in what conditions you need an 2.5Frigate.





82kg in ordinary clothes, probably heavier in all my wet gear.

The 2.5 is for 30kts and upwards, i do like to storm sail, so I need it to work as high as 45 knots max.

hilly said..
Fark rode the 3.5m in gusty crap conditions. The thing has no top end. Not sure I need my 2.5 now. Gusts hitting 30+ hardly noticed. Upwind delux.


Only negatives I have had are wingtips sticking when redeploying in light winds and gybing in light winds is not as direct as PRV2. Bar on the 4.5 is huge to help with light winds think.


Top end on the 3.5 starts to hit around 35 knots, just becomes too big rather than unmanageable.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
18 Oct 2026 8:11pm
Jeroensurf said..
To get everything in perspective: What do weight Meonash that you need an 2.5 Frigate?
The 4.5 Frigate V2 that I demoed had quite an overlap with my 3.5Quest and being 94kg I easily use that up to 30 knots. I have a 3m quest but so far not needed it yet so wonder in what conditions you need an 2.5Frigate.





82kg in ordinary clothes, probably heavier in all my wet gear.

The 2.5 is for 30kts and upwards, i do like to storm sail, so I need it to work as high as 45 knots max.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
18 Oct 2026 12:02am
windwaterfoil said..

MeonAsh said..


zdash said..
Ash, how would you compare the Frigate V2 vs. the Hatch V2? It seems you liked both of them. They appear to be targeting a similar all around riding style.




I would say the Hatch V2 is like a more rounded Pocket Rocket V2 and that was how I reviewed it as a bit of a mix of a Pocket Rocket v2 and a PowerPack - decent capability in all areas and it stows and redeploys nice with shorter lines.
The Frigate V2 takes that a few steps further with it's wind range, speed and the two connections of lines to the bar - which definitely reduces tangles.
The Frigate V2 is definitely a tiny bit more technical to fly but it doesn't take that long to learn the slightly different bar handling - mostly keeping a bit of rear line tension and just understanding the way a kite works in the wind window.



Thanks for sharing. Which sizes did you get?


3.5m and 2.5m .... replacing powerpacks in 3.6m, 3.0m and 2.4m. The crazy part is two wings vs three but more wind range with just two Frigates.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
17 Oct 2026 10:21pm
zdash said..
Ash, how would you compare the Frigate V2 vs. the Hatch V2? It seems you liked both of them. They appear to be targeting a similar all around riding style.


I would say the Hatch V2 is like a more rounded Pocket Rocket V2 and that was how I reviewed it as a bit of a mix of a Pocket Rocket v2 and a PowerPack - decent capability in all areas and it stows and redeploys nice with shorter lines.
The Frigate V2 takes that a few steps further with it's wind range, speed and the two connections of lines to the bar - which definitely reduces tangles.
The Frigate V2 is definitely a tiny bit more technical to fly but it doesn't take that long to learn the slightly different bar handling - mostly keeping a bit of rear line tension and just understanding the way a kite works in the wind window.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
17 Oct 2026 6:06am
eppo said..

MeonAsh said..
Frigate low end ... I'm not having any issues, it is just a different technique. PR v2 you just yank on the bar and off you go, it sits deeper in the window, which hits later in top end. Frigate v2 sits further forward, so you have to use the bar to trim it back in the window. Once you do this low end is no longer an issue, working fine.

I've tested the Orbit, Afterburner and now the Frigate v2. The difference after all the testing is I bought two Frigate v2s.



and why the frigate after testing those three?


It is quite simple logic ....

Where I ride it is not always wave conditions and the swell we do get is wind blown, as such parawing riders here engage in wave riding and free riding. Additonally when winds are lighter the waves are quite unpredictable, so down wind runs can involve multiple stow and redeploys. We can also lap or do larger upwind runs and downwind back.
This means any parawing used here needs to work across all conditions - downwind, wave ride and free ride (sometimes with no waves at all) - and we could get all of those conditions in a single week.
I also want some degree of value for money from a purchase.

Orbit - pretty much only useful for big upwind runs and then downwind, good wind range, annoying to freeride, not a good tool for multiple stow and redeploys.
Afterburner - good for upwind and free ride, good wind range, not the best for stow and redeploy, long lines, its quite a lot of material, freerides ok, not great value for money.
Frigate v2 - good upwind, good free ride, good stow and redeploy, good wind range, free rides nice, fast, reasonable price point.

The Frigate v2 just ticks more boxes and delivers well in all areas. It may not be the absolute best in every category compared to the others but it delivers to a high enough level in all areas that not much is left on the table.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
16 Oct 2026 4:27pm
Frigate low end ... I'm not having any issues, it is just a different technique. PR v2 you just yank on the bar and off you go, it sits deeper in the window, which hits later in top end. Frigate v2 sits further forward, so you have to use the bar to trim it back in the window. Once you do this low end is no longer an issue, working fine.

I've tested the Orbit, Afterburner and now the Frigate v2. The difference after all the testing is I bought two Frigate v2s.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
9 Oct 2026 5:38pm
hilly said..
The other thing I have done is move the harness line more to the centre away from the A lines. Makes toe side way easier to head hard up wind. Struggled with the long bar together my hand comfortably in the right place. Works well now.


Agree - harness line sits further back, putting it up behind the A lines is inviting the leading edge to collapse and puts more management on you controlling the rear lines.
Reply in Topic: PPC Orbit parawing
MeonAsh
MeonAsh
157 posts
157 posts
9 Oct 2026 7:50am
I've just finished my review on the Orbit 4.5m, should be out within a few days. I now have a 777 Hybrid 4.5m in for review...... I'm finding the 777 a lot easier to live with.
The Orbit for me was a real one trick pony - go high upwind in comfort, that's it, nothing else. If that's what you want - and you might if you are going miles upwind, then buy one.
It's definitely not for me - I like to do a few more things than just go upwind at a high angle comfortably. Everything else I did on the Orbit I found really quite frustrating - apart from handle pass gybes, which it does pretty well.

I think the overall lesson from it for me was I really don't like double skins - even ones with trim lines for low end power. The 777 Hybrid - I've not made any firm decisions on yet, it does some things I like , some things I don't like but it is a bit more of a mixed bag than the Orbit.
Reply in Topic: F-one Frigate v2
MeonAsh
MeonAsh
157 posts
157 posts
9 Oct 2026 7:36am
To get back on point ..... I've spent a while on the Frigate V2 now and I like it so much I bought one - a 3.5m.
I've been testing on a 4m and it has some serious wind range. Low end - feels like a 4.3m PRV2 would feel if it was 0.3m smaller, I'm not sure I buy into the idea that you need to size up.

The low end of it is mostly a technique thing, for sure it is easier to access the low end on the PRV2 as you don't need to do anything to access it, just pump and go, with the Frigate v2 you need to reign in the back of the bar and get it to sit deeper in the window. Once you do that you can get some decent pumping going and get up on foil.
MeonAsh
MeonAsh
157 posts
157 posts
25 Sep 2026 8:23am
I go from 5.7m PRV2 to 4.3m PRV2 ..... don't need the one in the middle. It's got a good low end, handles manoeuvres well. Can keep on it to up to about 18 knots and then it gets pretty hard to hang onto.
MeonAsh
MeonAsh
157 posts
157 posts
20 Sep 2026 5:49pm
Just a comment on low end wind ranges. I believe these are always stated for a dry parawing. Trying to get a PR V2 5.7 to fly in 10 knots when soaking wet and sitting on your board ...... not exactly easy.
MeonAsh
MeonAsh
157 posts
157 posts
23 Jul 2026 6:04pm
Had a demo Naish Hatch V2 for a couple of weeks before it's release to put this together ....

MeonAsh
MeonAsh
157 posts
157 posts
23 Apr 2026 2:29am
Spotted in the Leucate parawing race video .....